User's Manual

22
5. When the desired setting is displayed, press and hold the /RE/PA button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the /MENU button to return to STANDBY
mode.
G. Changing the Language
1. Press the /MENU button to enter the menu.
2. Press the button to go to the LANGUAGE programming option.
3. Press the button to change the setting. “English” will begin flashing.
4. Press the SCROLL UP or DOWN button to toggle between English,
Espanol, and Francais.
5. When the desired setting is displayed, press and hold the /RE/PA button to
save the setting. A long “beep” will sound to confirm the setting has been saved.
6. Continue with programming or press the /MENU button to return to STANDBY
mode.
H. Changing the User Name
1. Press the /MENU button to enter the menu.
2. Press the button to go to the USER NAME programming option.
3. Press the button to change. The entry will display a flashing prompt over the
the first character of the present USER NAME.
4. Enter the desired USER NAME using the TELEPHONE KEYPAD ( /ABC to
/WXY) buttons. The USER NAME can contain a maximum of 12 characters. See
page 15 for details.
5. Press and hold the /RE/PA button to save the setting. A long “beep” will sound
to confirm the setting has been saved.
6. Continue with programming or press the /MENU button to return to STANDBY
mode.
NOTE: The USER NAME will be displayed on the HANDSET LCD Screen during
STANDBY mode.
SAVE
L.D.S.
L.D.S.
7
L.D.S.
SAVE
EDIT/FLASH
EDIT/FLASH
L.D.S.
8
0
9
SAVE
L.D.S.
Caller ID System Operation
DSST~MAN~ATC.qxd 4/24/2003 5:15 PM Page 29