User's Manual

Caller ID System Operation

TELEPHONE

KEYPAD

Function

PBX Number: Inserts if a “PBX Number” before an outgoing number is

dialed. Select the number (0-9) which is required to access an outside line

when using a switchboard system, and the phone will automatically dial the

PBX number and a pause before any speed dial or Caller ID callback number.

Factory setting is “OFF.”

Language: Changes the language that appears on the LCD Screen. Choose

between English, French, or Spanish.

User Name: Changes the user name (ID) that appears on the LCD Screen

during STANDBY mode.

MSG Waiting Delete: Clears current message waiting indication.

Area Code: Adds the local Area Code to numbers that were stored as 7-digits

in the phone book and 10-digit dialing is required in the local calling area.

Alarm Clock: Sets the Alarm clock time.

NOTE: At any time during options programming you can quit and the settings that you

have changed will be saved. Press the /MENU button to quit the options menu

or let the options programming time out by not pressing any TELEPHONE KEYPAD

buttons for 20 seconds.

A. Setting the Ringer Level

1. Press the /MENU button to enter the menu.

2. Press the button to go to the RINGER LEVEL programming option.

3. Press the button to change the setting. “High” will begin flashing.

4. Press the SCROLL UP or DOWN button to toggle between High, Low, and Off.

5. When the desired setting is displayed, press and hold the /RE/PA button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to STANDBY

mode.

L.D.S.

EDIT/FLASH

L.D.S.

SAVE

DSST~MAN~ATC.qxd 4/24/2003 5:15 PM Page 26