User's Manual

11
07110A-1
99251 MANUAL Ver.1.0
Page:11 ENGLISH VERSION
99251 MANUAL Ver. 1.0
Page:11 ENGLISH VERSION
Selecting Channels
The 99251 radio has 22 available channels.
To change channels:
1. Press F(function) button once. The channel
number on the display will begin to flash.
2. While the channel number is flashing,
Press the  button to a higher channel.
Press the  button to a lower channel.
3. Press the F (function) button to confirm the
desired channel.
NOTE: Refer to the "FRS Channel Table" section of
this manual for detailed frequency listings.
Selecting the CTCSS Sub-code
The 99161 radio has 38 available CTCSS Sub-codes.
Please set a CTCSS Code in addition to a channel if
you do not want to be bothered by other parties.
To change the CTCSS Code:
1. Press the F button twice. The CTCSS sub-code
on the display panel will begin to flash.
2. While the CTCSS number is flashing,
Press the  button to increase the code.
Press the  button for a lower Code.
3. Press the F (function) button or PTT button to
confirm your channel and CTCSS code
selection and return to normal mode.
NOTE: Refer to the "FRS Channel Table" and
“CTCSS Code” section of this manual for detailed
frequency listings.
Monitor
You can use the MONITOR feature to activate and
listen in for weak signals on the current channel.
•
Press the M (monitor) button for normal
monitoring.
•
Press and hold the M (monitor) button for at
least two seconds for continuous monitoring.