User's Manual

BASE UNIT Controls
1. Button: Press to play messages.
2. RESET Button: Press to reset the system and clear all recordings.
3. POWER-IN CONNECTION JACK
4. TELEPHONE LINE CONNECTION JACK
5. ERASE Button: Press to erase messages.
6. Button: Press to PAGE the HANDSET. Press again to stop.
7. (MAILBOX 1) Button: Press to activate functions for MAILBOX 1.
8. (MAILBOX 3) Button: Press to activate functions for MAILBOX 3.
9. ANSWER FUNCTION ON/OFF (ANS. ON/OFF) LED Indicator: Lights when the
answer function is turned ON.
10. IN USE LED Indicator: Lights up to indicate that the HANDSET is in TALK mode or
blinks to indicate an extension phone is in use.
11. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best
performance, clean the CHARGE TERMINALS periodically with a damp cloth.
12. CHARGE LED Indicator: Lights up when the HANDSET is placed on the BASE UNIT
for charging.
13. Button: Press to set/check the day and time.
14. Button: Press to set the 3-digit Remote Access Code for remote operation.
15. MESSAGE ALERT: Set switch to ON to generate a “beep” sound every 15 seconds
when a new message has been received.
16. RING SELECT Switch: To select the number of rings before the Answering System
answers a call.
3R - System answers a call after the third ring.
5R - System answers a call after the fifth ring.
TS (TOLL SAVER) - System answers after the third ring only if you have new
messages. Otherwise, the system will answer after the fifth ring.
17. RINGER ON/OFF Switch: Set switch to OFF position to disengage the ringer on the
BASE UNIT.