User's Manual

E. Adjusting the Contrast

1. Press and hold the /MENU button to enter the menu.

2. Press the button to go to the CONTRAST programming option.

3. Press the button to change the setting. “4” will begin flashing.

4. Press the SCROLL UP or DOWN button to toggle from 1 to 8 levels of

contrast.

5. When the desired setting is displayed, press and hold the /RE/PA button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to

STANDBY mode.

F. Setting the PBX Number

1. Press and hold the /MENU button to enter the menu.

2. Press the button to go to the PBX NUMBER programming option.

3. Press the button to change the setting. “OFF” will begin flashing.

4. Press the SCROLL UP or DOWN button to customize the digit to match

your PBX system. When not connected to a PBX, the phone will only function

normally when set to “OFF.”

5. When the desired setting is displayed, press and hold the /RE/PA button to

save the setting. A long “beep” will sound to confirm the setting has been saved.

6. Continue with programming or press the /MENU button to return to

STANDBY mode.

G. Changing the Flash Time

1. Press and hold the /MENU button to enter the menu.

2. Press the button to go to the FLASH TIME programming option.

3. Press the button to change the setting. “600” will begin flashing.

4. Press the SCROLL UP or DOWN button to select the desired dialing delay.

Caller ID System Operation