User's Manual

BASE UNIT Controls
1. Button: Press to set the day during time setting, or press to set the first digit of
the access code during code setting.
2. MINUTE Button: Press to set minute during time setting, or press to set the
third digit of the access code during code setting.
3. Button: Press to set/check the day and time.
4. Button: Press to set the hour during time setting, or press to set the second
digit of the access code during code setting.
5. CHARGE TERMINALS: For charging the HANDSET BATTERY PACK. For best
performance, clean the CHARGE TERMINALS periodically with a damp cloth.
6. BATT (BATTERY) LOW LED Indicator: Lights up when backup battery power is low.
7. IN USE LED Indicator: Lights up to indicate that the HANDSET is in TALK mode or
blinks to indicate an extension phone is in use.
8. CHARGE LED Indicator: Lights up when the HANDSET is placed on the BASE UNIT
for charging.
9. MICROPHONE
10. (OUTGOING MESSAGE) Button: Press and hold down to record OGM messages.
11. ANSWER FUNCTION ON/OFF (ANS. ON/OFF) LED Indicator: Lights when the
answer function is turned ON.
12. (ANSWER FUNCTION ON/OFF) Button: Press to activate or deactivate the
answer function.
13. Button: Press to set the 3-digit Remote Access Code for remote operation.
14. MESSAGE ALERT: Set switch to ON to generate a “beep” sound every 15 seconds
when a new message has been received.
15. ANNOUNCE ONLY/INCOMING MESSAGE Switch:
ICM - System records the incoming messages.
ANNC - System plays your announcement and then hangs up without
recording messages.
16. RINGER ON/OFF Switch: Set switch to OFF position to disengage the ringer on the
BASE UNIT.
17. RING SELECT Switch: To select the number of rings before the Answering System
answers a call.
3R - System answers a call after the third ring.
5R - System answers a call after the fifth ring.
TS (TOLL SAVER) - System answers after the third ring only if you have new
messages. Otherwise, the system will answer after the fifth ring.