User's Manual

J. Deleting Message Waiting Indication
1. Press the /menu button to enter the menu.
2. Press the button to go to the MESSAGE WAITING programming option.
3. Press the button to reset the Message Waiting Indication. “DEL” will begin
flashing.
4. Press the button to delete the indication. A long beep will sound to confirm
the setting has been saved.
5. Continue with programming or press the /menu button to return to the
STANDBY mode.
K. Setting the Area Code
1. Press the /menu button to enter the menu.
2. Press the button to go to the AREA CODE programming option.
3. Press the button to change the setting. “---” will begin flashing.
4. Press the TELEPHONE KEYPAD ~ buttons to enter the three digit area
code that your phone number begins with.
5. When the setting you desire is displayed, press and hold the button to save
the setting. A long beep will sound to confirm the setting has been saved.
6. Press the /menu button to return to the STANDBY mode.
NOTE:
Do not use the AREA CODE programming if you are required to dial 10 digits
(XXX-XXX-XXXX) to dial a local number.
Caller ID System Operation
save
0
oper
save
*
1
0
oper
27
IMPORTANT
In order to utilize the Caller ID feature, you
must subscribe to Caller ID service from
your local telephone company.