User's Manual

Caller ID System Operation

E. Adjusting the Contrast

1. Press the /menu button to enter the menu.

2. Press the button to go to the CONTRAST programming option.

3. Press the button to change the setting. “3” will begin flashing.

4. Press the SCROLL UP or DOWN button to toggle between the three levels

of contrast.

5. When the setting you desire is displayed, press and hold the button to save

the setting. A long beep will sound to confirm the setting has been saved.

6. Continue with programming or press the /menu button to return to the

STANDBY mode.

F. Setting the PBX Number

1. Press the /menu button to enter the menu.

2. Press the button to go to the PBX NUMBER programming option.

3. Press the button to change the setting. “OFF” will begin flashing.

4. Press the SCROLL UP or DOWN button to customize the digit to match your

PBX system. When not connected to a PBX, the phone will only function

normally when set to “OFF.”

5. When the setting you desire is displayed, press and hold the button to save

the setting. A long beep will sound to confirm the setting has been saved.

6. Continue with programming or press the /menu button to return to the

STANDBY mode.

G. Changing the Flash Time

1. Press the /menu button to enter the menu.

2. Press the button to go to the FLASH TIME programming option.

3. Press the button to change the setting. “600” will begin flashing.

4. Press the SCROLL UP or DOWN button to select the desired dialing delay..

jkl

mno

save

prs