@ BELL Phones BY NORTHWESTERN BELL PHONES Excursion” 36110 Congratulations on your selection of the Excursion” 36110 from Northwestern Bell Phones. This quality 2.4GHz cordless telephone, like all Genuine BELL ® products, has been designed to give you many years of continuous service and represents the best value for your money. It requires little maintenance and is easy to setup and operate.
WELT neural IMPORTANT SERVICE INFORMATION Read this manual before attempting to setup or use this instrument. It contains important information regarding safe installation and use. Keep this manual for future reference. Also save the carton, packing and proof of purchase to simplify and accelerate any needed assistance. If you need assistance or service, call (800) 888-8990 between 8:00 am. and 4:30 p.m. Pacific Standard Time, Monday through Friday.
WAS SAVE THESE INSTRUCTIONS A IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: I. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 4.
WAL not use the telephone to report a gas leak in the vicinity of the leak . Use only the power cord and batteries indicated in this manual. Do not dispose of batteries in a fire. They may explode. Check with local codes for possible special disposal instructions. SAVE THESE INSTRUCTIONS A\ INSTALLATION ~ ~ PRECAUTIONS Never install telephone wiring during a lightning storm. Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
11. WAIL should be stabilized at room temperature prior to use after cold storage. Disconnect telephone fines before installing the battery pack. A FCC NOTICE The FCC requires that you be advised of certain requirements involving the use of this telephone. 1. 2. This telephone is hearing aid compatible. This equipment complies with Part 68 of the FCC rules.
“ASL does not guarantee the equipment will operate to the user's satisfaction. Before installing this equipment, users should ensure that it is permissible to be connected to the facilities of the local telecommunications company. The equipment must also be installed using an approved method of connection. The customer should be aware that compliance with the above Repairs to certified equipment should be made by an authorized Canadian maintenance facility designated by the supplier.
WE ENV virile EXCURSION'36110 CONTROLS DIAGRAM Handset IN USE/LOW BAT LED Indicator J Headset Jack | VOLUME Control Button we MEMO Button 123 FLASH Button ~~ ~ Charge Terminals Channel(CH) BUXOM em REDIAL/P, Microphone TALK Button Button { PAGE Button te IN USE/CHARGE LED Indicator Jack TEL LINE Jack Base Unit (Rear View) 112394 Owners Manual:36110 ver.
DESCRIPTIONS HANDSET CONTROLS: Channel (CH) Button -Used to manually select one of the 40 operating channels when you experience interference on the handset. Charge Contacts For charging the handset battery pack. We recommend that you clean these contacts periodically with an alcohol-moistened cloth or cotton swab. FLASH Button Momentarily hangs up the phone to access custom calling features such as Call waiting or Three way calling provided by your local phone company.
INSTALLATION CAUTION: USE ONLY THE Ni-Mg BATTERY TYPE INCLUDED WITH THIS UNIT, USE OF OTHER BATTERY TYPES MAY CAUSE INJURIES OR DAMAGE. BATTERY INSTALLATION (HANDSET) 1 Remove the battery compartment cover of the handset by pressing the bottom of the cover and lift it. Connect the rechargeable Ni-Mg battery pack as shown below. I Battery Connector Battery Compartment Figure 1 Insert the Ni-Mg battery pack into the battery compartment of the handset. 4.
{ i TELEPHONE OPERATION TONE / PULSE Dialing + If your home is equipped with tone dialing service, set the TONE/ PULSE switch to TONE position. « If you have a pulse (rotary) dialing service, set the TONE/PULSE switch to PULSE position. Mixed Mode (Temporary Tone) Dialing 1£ you only have pulse (rotary dialing) service in your area and want to access Tone dialing services, set the base unit’s TONE/PULSE switch to the PULSE position.
Flash Pressing the FLASH button (while the phone line is in use) momentarily hangs up the phone to access custom calling features such as Call Waiting or Three Way Calling provided by your local phone company. For other Custom Calling features, refer to the instructions provided by your local phone company. Pause Function In some cases, such as PA BX or long distance service, a pause may be needed in the dialing sequence. Pressing the PAUSE button inserts a 4-second delay between dialed numbers.
+ OFF Turns off the handset ringer. However, please ante that you will not be able to place or receive calls in this mode. NOTE: The handset will not ring when the RINGER ON/OFF switch is set to OFF. Low Battery Warning When the handset battery voltage level is low, the IN BATHHOUSE LOW LED indicator on the handset will start to blink and a beep sound will be heard every 12 seconds. Return the handset to its cradle on the base unit for charging.
frequently, it can be minimized or eliminated by lowering the height of your base antenna or by relocating the base unit. You can check for interference before selecting the final base unit location by plugging in the phone. Improving Cordless Reception Follow these guidelines to improve cordless sound quality: » Select an area to install the Excursion® 36110 where it is closest to the center of your home or office.
TROUBLESHOOTING SYMPTOM SOLUTION No dial tone Cheek to see if the handset battery pack is connected inside the handset battery compartment. Make sure that the adapter plug is connected to the base unit. Check for the telephone line cord connections. Ensure that both connectors are plugged securely on the jacks Ensure that no other telephone is sharing the same line as the Excursion” 36110 when off-hook. Test the phone at a different telephone wall jack and listen for a dial tone.
SYMPTOM SOLUTION The unit locks the unlikely event that the unit locks up and becomes inoperable, you can and becomes reset the system by momentarily interconnecting and reconnecting the handset battery pack. Afterwards, return the handset to its cradle on the base munition reset the security code before using the unit, » Should a power outage occur while the handset is away from the base unit, the handset must be returned to its cradle on the base unit to reset the security code when power is resumed.
BELL Phones BY NORTHWESTERN BELL PHONES Distributed Exclusively Worldwide by Uncial Enterprises. Inc., Industry, California, USA www.nwbphones.com HIBACHI Owners Manual:36110 ver.
