User's Manual

RADIO FEATURES
DESCRIPTION
INSTALLATION
Removing the Belt Clip
Installing the Belt Clip
5
6
3 4
FIGURE 1
(REAR VIEW)
FIGURE 2
(REAR VIEW)
BELT CLIP TAB
BELT CLIP SLOT
BELT CLIP
Battery Installation
BATTERY COVER
TAB
FIGURE 3
(REAR VIEW)
FIGURE 4
(BATTERY COMPARTMENT WITH
"AAA" batteries)
BATTERY
COVER
1. Remove the BELT CLIP. (Refer to "Removing the Belt Clip" section.)
2. Remove the BATTERY COVER from the BATTERY COMPARTMENT. See
Figure 3.
3. Install four (4) "AAA" alkaline batteries (not included) or Ni-Cd rechargeable
batteries (not included) following the polarities as shown in Figure 4.
4. Reinstall the BATTERY COVER and return the BELT CLIP into position. (Refer
to "Installing the Belt Clip" section.)
BELT CLIP
To remove the clip from the unit, push up on the belt clip while pulling
the belt clip tab.
1. Insert the BELT CLIP hooks into the matching slots as shown in
Figure 2.
2. Slide the BELT CLIP down, a “click” indicates the BELT CLIP is
locked into position.
Call
Mode
GMRS
VX
TX RX
SC
P
HI
LO
BELT CLIP(LOCATED
ON THE REAR)
UP BUTTON
(CHANNEL/FUNCTION
EDIT)
DOWN BUTTON
(CHANNEL/FUNCTION
EDIT)
PTT BUTTON
(PUSH TO TALK)
CALL BUTTON
MONITOR
BUTTON
MODE BUTTON
ON/OFF/VOLUME
CONTROL
LCD SCREEN
MIC
ANTENNA
BATTERY COMPARTMENT COVER
LATCH (LOCATED ON THE REAR)
BATTERY COMPARTMENT
(LOCATED ON THE REAR))
EAR/MIC/
CHARGE JACK
SPEAKER
BELT CLIP
ANTENNA
CALL button - Press to transmit CALL Tones.
PTT (PUSH TO TALK) button - Press to transmit.
UP /DOWN buttons - Press to change channels and
select FUNCTION in every editing mode.
SPEAKER
LCD (Liquid Crystal Display) Screen - Displays current channel
selection and other radio status symbols.
Ni-MH rechargeable batteries (a Ni-MH rechargeable battery pack is
included with the package).
BATTERY COMPARTMENT - Houses four(4) "AAA" alkaline or
BATTERY COMPARTMENT COVER LATCH - Secures BATTERY
COVER.
MIC - MICROPHONE
CHARGE JACK
MONITOR M button - Press to tune in and hold onto weak
signals.
ON/OFF/VOLUME CONTROL - Rotate to
.
turn your unit ON/OFF
and to adjust the VOLUME CONTROL level
MODE - Allows you to shift into FUNCTION editing mode. button
EARPHONE & MIC (MICROPHONE) JACK
CHARGE TERMINAL