Instruction Manual

9
in-car, the recording video will be black and white.
 Screen Saver
Options: Off/15 Sec/30 Sec/1 min
If you set the screen saver time, the screen will enter blank screen
according to the setting time to protect screen.
 Delay Power Off
Options: Off/5 Sec/10 Sec /15Sec
If you set the delayed power off time, when the device is powering off, the
setting time will be extended and then power off to confirm the integrality
of the last video.
 Beep Sound
Options: On/Off
To turn on/off beep sound when press the buttons.
 Language
Options: English/French/Spanish/Portuguese/German/Italian/Simplified
Chinese/Traditional Chinese/Russian/Japanese.
To select the language you want. (On the screen display)
 Frequency
Options: 50Hz/60Hz
To set or reset the frequency of the AC power to reduce interference of
fluorescent lights (In the USA and Canada, set it to 60Hz).
 Parking monitor
Option：Off/low/middle/high
If the parking monitoring function is turned on, the device is power off.
When the vehicle is impacted by a certain amount of force, the device will
automatically start for 15 seconds recording, then automatically power off
again. And it will start recording again at the next collision, and so on.
When the car starts, the recording will become normal long recording.
 Format
This function will format (erase all data) the Micro SD Card.
Warning: When formatting the card, all files will be erased. Upload all
files you would like to save to your PC BEFORE you start to format the
card.
 Default Setting
Reset all settings to factory preset. Please set it carefully, the original
personalized setting parameters will not exist after setting.
 Version
To check the device version.