User's Manual

9
You can also use UID mode to log in .
From Register Mode area, select the mode to UID , then input
your UID to UID field.
1
Add Device
10
2
Client UI Introduction
11 12
3
Remote Config
Right click the Device , it will show
the setting windows
1.Live View: Access the live view mode.
2.Playback : Remotely playback video recorded to NVR or
camera SD card.
3.RAM/CPU: Shows the memory and CPU loading.
4.Local Setting: Setting the Record/Download/Capture path.
5.Device List: Shows the Device connected to the software.
6.PTZ : Setting the PTZ parameters.
7.Basic Settings: Can set OSD/Encode/Image parameters.
10.Play Control: Choose to play Clear/Fluent video.
1
2
Live View
Playback
3
RAM/CPU
4
Local Setting
5
Device List
6
PTZ
7
Basic Settings
10
Play control
Previous and Next Page
12
Snap/Record
Sound
Display Layout
9 8
11.Previous and Next Page : Choose which group of channel to
display during multi-channel view .
12.Snap/Record: Capture image or record live video.
9 . Sound: Enable / Disable the sound and adjust the volume of
the sound
8 . Display Layout: Choose 1 / 4 channel view
Click Remote Config , you will see below windows
1
2
3
1.Click Add Device button on the top right
2.Click Scan Device in LAN
3.Double click the device you want to add,then device info will
be displayed.
4.Input the password (default password is Blank) ,if you already
create password on Reolink App ,You need to use the password
you created to log in .
5.Then click OK to log in
4
WiFi Settings
1
2
3
4
5
11
8
Client Software
Reolink Client
Please Install Reolink Client Software from CD or download
software from . Then run the software . www.reo-link.com
5
SD Card
Click the Init button you may format the SD card.
SD card can only support alarm video storage.
6
Record schedule
On Device Setting --Record Schedule page,you may make the
recording plan.
1. Normal: Keep recording all the time during your plan
2. Motion: If have motion during this schedule, you may receive
alarm video and save to SD card.
3. None: No recording during this period of time.
On Device Setting — WiFi Setting page 
You can set WiFi for the camera.
1. Input the SSID for your WiFi signal.
2. Input password for your WiFi.
3. Click OK.
Now you can disconnect the network cable and view the
camera by WiFi .
On device Setting- SD card page, you may check the storage
for the SD card.
Note: For the IP cameras with SD card only.
13 147
On Devices page,click button to add and
modify Device . After finished setting ,click Save .
6
Add Device in Different Network
1.Device Name:Modify Device name here
2.Connect Mode:Change the connection mode to P2P or IP/
Domain by click arrow button
3.UID:Click QR code button to scan QR code or directly input
the UID
4.User Name and Password
5.Save: Save the settings you modified on this page
6.Start Live View: Click to view the device
Start Live View
1
Device Name
2
Connect Mode
3
UID
4
User Name
Password
5
Save
6
Start Live View
Device
Camera1
Device Name
Connect Mode
P2P
UID
XCPTP018898LS
User Name
admin
Password
Please input Pass...