User's Manual

Table Of Contents

2, Detail connection diagram :

1 , After power on PS3 console , select setting and choose Accessory Settings)

3 PS3 console setting,

2), Select Audio Device Settings

3), Set Input Device and Output Device to 2.4G

Wireless headset , at this moment , you can

set the microphone level and test the sound

level when you wear the headset , you can

set mic level from 1 to 5

4), Back to setting screen , select Sound Settings

5 , Select Audio Output Settings)

6 , Select Optical Digital)

7 , Remove √ticks of “Dolby Digital 5.1ch” and “DTS 5.1ch” and press Enter to confirm )

8, Set Audio Multi-Outpot on

1), Connect transmitter and PS3 console USB port using the short USB cable ,light flashing .

2), Long press power button for 3 seconds to power on the headset , the headset should auto

pair with the transmitter and solid blue light light up , if the headset light keep flashing, please

pair them once again .

3), During pairing , please power on PS3 and do not play audio , place headset close to

transmitter within 50 cm and long press mute button on headset for 5 seconds and release

your finger when light keep fast flashing , then the light on transmitter and headset will

become solid blue.

4), Default setting for mute is off ( chat on ), if you want to mute your chat voice, please press

the mute button once and transmitter light will become red.

5), Volume adjusting switch allow you to adjust the game background and chat volume .

4 Operation method : ,

OPTIC AL