User's Manual

Table Of Contents

4 Operation method:,

cable, light flashing .

2), Long press power button for 3 seconds to power on the headset , the headset

should auto pair with the transmitter and solid blue light light up , if the headset

light keep flashing , please pair them once again .

3), During pairing , please power on PS4 and do not play audio , place headset close

to transmitter within 50 cm and long press mute button on headset for 5 seconds

and release your finger when light keep fast flashing , then the light on transmitter

and headset will become solid blue.

4), Default setting for mute is off ( chat on ), if you want to mute your chat voice ,

please press the mute button once and transmitter light will become red.

5), Volume adjusting switch allow you to adjust the game background and chat

volume.

1), Connect transmitter and PS4 console USB port using the short USB

5, Common issue and solution

Common issue Solution

1) Can’t power on

headset

2) Charging light off

1、Long press power on button for 3 seconds

2、Using USB cable to charge the headset ,

charging red indicating light on during charging and

off after fully charge at about 5 hours charging

Power off after 10 mins

Fully charge headset for 5 hours before use

No background sound

1 Plug in microphone for headset

2、Use short USB cable for audio transmission

3、Setting issue : Settings-Accessory Settings-

Audio Device Settings-Input Device and Output

Device Select all options: 2.4G Wireless headset

---OK

4、Mic being muted , press the mute/pair button to

active mic sound

、

No mic sound

5 PS3 setting,

1 Connect PS3 optical port with Transmitter optical port using Optical cable

( protection cover must be removed ) ; Using Micro USB short cable to connect PS3

USB port with Transmitter USB port as below ：

10 , Choose Audio Devices and press Enter)

11 , Choose Output to Headphones and press Enter)

12 , Choose Chat Audio and press Enter )

9 , Then choose setting and choose Devices and press Enter)