User's Manual

3, Click mouse left button to choose the “Playback” as shown in Picture 3, and then choose the
“5.8G wireless headset” as shown in Picture 4 , click mouse left button to choose the “Set
Default ” as shown in Picture 5
Picture 5
Picture 3
Picture 4
Common issue Solution
1) Can’t power on
headset
2) Charging light off
1、Long press power on button for 3 seconds
2、Using USB cable to charge the headset ,
charging red indicating light on during charging
and off after fully charge at about 5 hours charging
Power off after 10 mins
Fully charge headset for 5 hours before use
No background sound
1 Plug in microphone for headset
2、When using Kinet for chatting, please set kinet
to open position and put kinect in a good position
facing you to receive your chat voice
3、When using Microsoft adapter , Please press
the mic mute off , mic volume can be adjusted
higher or lower by chat volume switch .
、
No mic sound
1 Optical cable not connected correctly , please
remove protection cover and connect with right
direction
2、setting should be : Setting -- Display & Sound
– ① optical --stereo uncompressed ( don't choose
stereo bitstream cut or off ② chat mixer -- Do
nothing
、
5, Common issue and solution
4, Operation method :
1) Connect transmitter and Xbox One console USB port using the short
USB cable ,light flashing .
2) Long press power button for 3 seconds to power on the headset , the
headset should auto pair with the transmitter and solid blue light light
up , if the headset light keep flashing , please pair them once again .
3) During pairing , please power on Xbox One and do not play audio ,
place headset close to transmitter within 50 cm and long press mute
button on headset for 5 seconds and release your finger when light
keep fast flashing , then the light on transmitter and headset will
become solid blue.
4) Default setting for mute is off ( chat on ), if you want to mute your chat
voice , please press the mute button once and transmitter light will
become red
5) Volume adjusting switch allow you to adjust the game background and
chat volume .
8, Suitable for PC/MAC
1, Using Micro USB-USB long cable to connect transmitter with PC ,
please keep the distance between transmitter & PC as far as possible
2, PC setting ( Windows 8 version for example)
1) USB the 80 mm long USB cable to connect transmitter with your PC ,
2), Move your mouse to right bottom corner of desk top on the speaker icon as shown in
Picture 1, click right button of mouse as shown in Picture 2,
Picture 1 Picture 2
EN