User's Manual

1, Connect Xbox One optical port with Transmitter optical port
using Optical cable ( protection cover must be removed ) ; Using
Micro USB Audio cable to connect Xbox One USB port with
Transmitter USB port as below :
2, Detail connection diagram :
Using HDMI cable to connect Xbox console and TV ( Display )
recommend to use kinect for chatting ( wireless ) , if you don’t have kinect ,
you can buy a Microsoft adapter using attached 3.5mm 3 poles to 3.5 mm
4 poles cable with 3.5 mm 3 poles plug to headset and 3.5 mm 4 poles
plug to adapter’s 3.5 mm jack .
5, Operation method :
1), Connect transmitter and Xbox 360 console USB port using the short USB cable,
light flashing .
2), Long press power button for 3 seconds to power on the headset, the headset
should auto pair with the transmitter and solid blue light light up, if the headset
light keep flashing , please pair them once again .
3), During pairing , please power on Xbox 360 and do not play audio, place headset
close to transmitter within 50 cm and long press mute button on headset for 5
seconds and release your finger when light keep fast flashing , then the light on
transmitter and headset will become solid blue.
4), Default setting for mute is off ( chat on ), if you want to mute your chat voice ,
please press the mute button once and transmitter light will become red.
5), Volume adjusting switch allow you to adjust the game background and chat
volume .
Common issue Solution
1) Can’t power on
headset
2) Charging light off
1、Long press power on button for 3 seconds
2、Using USB cable to charge the headset ,
charging red indicating light on during charging
and off after fully charge at about 5 hours charging
Power off after 10 mins
Fully charge headset for 5 hours before use
No background sound
1. Plug in microphone for headset
2.Please press the mic mute off , mic volume
can be adjusted higher or lower by chat volume
switch .
No mic sound
1.Optical cable not connected correctly , please
remove protection cover and connect with right
direction
2.Console setting should be :
Settings--System--Console settings--Audio--
①Digital Output -- Digital Stereo(don’t choose
Dolby Digital 5.1 or Dolby Digital with WMA Pro),
②Sound Effects--Enable Sound Effents,
③Ratings Collection Sound ---Turn On
6, Common issue and solution
7 XBOX ONE setting,
EN