User's Manual

ManualsBrandsShenzhen Bada Sheng Electronic ManualsAudio Equipment5.8GHz Optical Wireless Headset

OPTICAL

Common issue Solution

1) Can’t power on

headset

2) Charging light off

1、Long press power on button for 3 seconds

2、Using USB cable to charge the headset ,

charging red indicating light on during charging and

off after fully charge at about 5 hours charging

Power off after 10 mins

Fully charge headset for 5 hours before use

No background sound

1 Plug in microphone for headset

2、Use short USB cable for audio transmission

3、Setting should be : Settings-Accessory

Settings-Audio Device Settings-Input Device and

Output Device - Select all options: 5.8G Wireless

headset-OK-Enter 3.Press pairing button once for

mute off

4、Mic being muted , press the mute/pair button

to active mic sound

、

No mic sound

1.Optical cable not connected correctly , please

remove protection cover and connect with right

direction

2.Console setting should be :

Settings--System--Console settings--Audio--

①Digital Output -- DigitalStereo(don’t choose

Dolby Digital 5.1 or Dolby Digital with WMA Pro),

②Sound Effects--Enable Sound Effents，

③Ratings Collection Sound ---Turn On

5, Common issue and solution

1), Connect transmitter and PS3 console USB port using the short USB cable ,light

flashing .

2), Long press power button for 3 seconds to power on the headset , the headset

should auto pair with the transmitter and solid blue light light up , if the headset

light keep flashing , please pair them once again .

3), During pairing , please power on PS3 and do not play audio , place headset close

to transmitter within 50 cm and long press mute button on headset for 5 seconds

and release your finger when light keep fast flashing , then the light on transmitter

and headset will become solid blue.

4), Default setting for mute is off ( chat on ), if you want to mute your chat voice,

please press the mute button once and transmitter light will become red.

5), Volume adjusting switch allow you to adjust the game background and chat

volume .

4 Operation method : ,

6 Xbox 360S setting,

1, Connect Xbox 360S optical port with Transmitter optical port

using Optical cable ( protection cover must be removed ) ; Using Micro

USB Audio cable to connect Xbox 360S USB port with Transmitter

USB port as below :

2 Detail connection diagram :,

Using HDMI cable to connect Xbox360S console with TV ( Display ), connect

2.5mm to 3.5 mm Xbox cable with 3.5 mm plug to headset & 2.5mm plug to

Xbox controller 2.5mm jack

Summary of content (6 pages)

PAGE 1
6, Xbox 360S setting 4, Operation method : EN 1), Connect transmitter and PS3 console USB port using the short USB cable ,light flashing . 2), Long press power button for 3 seconds to power on the headset , the headset should auto pair with the transmitter and solid blue light light up , if the headset light keep flashing , please pair them once again .
PAGE 2
3, Connection for old version Xbox 360 & Xbox 360E ( no optical port ) if TV had 5), Select Digital Stereo and select Digital Stereo Connect HDMI cable with console and TV ( Display ) , connect transmitter and TV ( with optical port ) using optical cable , connect transmitter USB port & console USB port with USB audio cable 6), Select Sound Effects OPTICAL 7), Select Enable Sound Effects 4, XBOX 360 System Setting 1), After power on Xbox 360 , select setting then select System 8), Back to settings in m
PAGE 3
7, XBOX ONE setting 5, Operation method : EN 1), Connect transmitter and Xbox 360 console USB port using the short USB cable, light flashing . 2), Long press power button for 3 seconds to power on the headset, the headset should auto pair with the transmitter and solid blue light light up, if the headset light keep flashing , please pair them once again .
PAGE 4
), Select Optical audio EN OPTICAL 5), Choose Stereo uncompressed 3, XBOX ONE System setting 1), After power on Xbox One , select setting --- all setting 6), Back to Display & sound screen , select Volume 2), Select Display & sound 7), Select Chat mixer 3), Select Audio output 8), Choose Do nothing
PAGE 5
8, Suitable for PC/MAC 4, Operation method : EN 1) Connect transmitter and Xbox One console USB port using the short USB cable ,light flashing . 2) Long press power button for 3 seconds to power on the headset , the headset should auto pair with the transmitter and solid blue light light up , if the headset light keep flashing , please pair them once again .
PAGE 6
Picture 6 Picture 7 Step 5 Choose Sound Effects as Play sound effects though -- 5.8 G Wireless Headset , tick the three ticks shown in below diagram Picture 8 9, MAC setting Step 1 -- Choose System preferences Step 2 choose Sound 10, Specification Headset : Step 3 choose input setting and set to 5.8G Wireless Headset Step 4 Choose output setting and set to 5.8G Wireless Headset Working voltage: 3.5-4.2V Lithium battery: 1100mAh Working hours: ≥6h Charging time: ≈5h Wireless Frequency: 5.730GHz - 5.