BLUETOOTH® SPEAKER USER MANUAL YM-C06 *The picture is only provided for reference.
GETTING STARTED To make a correct use of the functions and know well about the system connection and usage, please read this user's manual carefully before using the product. Keep this manual in a safe place for future reference. INTRODUCTION This Bluetooth® speaker will allow you to listen to your music wirelessly from your mobile phone, tablet or other Bluetooth® enabled device. It delivers powerful and clear sound. The built-in microphone allows you to answer calls from mobile phone.
INTRODUCTION OF PRODUCT PANEL AND FUNCTIONS 1. On/Off switch 2. PREV 3. Multifunction button : Play/Pause/Mode (Switch between Bluetooth and TF card playing) 4. NEXT 5. Vol- 6. Vol+ 7. Micro USB charging port 8. TF card slot 9.
CHARGING THE BLUETOOTH® SPEAKER Connect the micro USB port of the USB charging cable into the USB port on the side of the speaker. Connect the other end of the USB cable to your computer’s USB port or an USB wall charger (not included) The LED indicator turns RED, indicating the battery is being charged. The LED indicator will turn off when the speaker is fully charged. (Approximately 3 hours).
USING YOUR BLUETOOTH® SPEAKER PLAYING MUSIC To enjoy wireless music on your Bluetooth® Speaker, make sure you are connected to a Bluetooth® enabled device. Once connected you can press PLAY on your Bluetooth® device or you can press the M button on the YM-C06 speaker. Once the music is playing, you can control it from the control buttons of the YM-C06 speaker. Volume control Press the “+” or the “-” button to adjust the volume in the desired level.
To redial the last number called : Press the M button twice quickly. The last number called will be redialed. TECHNICAL SPECIFICATIONS Bluetooth® version: 3.0 Working distance: up to 10 meters in open space Supporting Profiles: AVRCP, A2DP, Hands-Free Profile (HFP) and Headset Profile (HSP) Frequency range: 2.4-2.48Ghz Output power: 2x3Watts Distortion: ≤ 1.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
undesired operation. Note: Modifications to this product will void the user’s authority to operate this equipment.
