Tailgate Speaker System Item No: R‐011M/BTTG‐1/6357 INSTRUCTION MANUAL PLEASE READ ALL INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE USE 1
Thank you for purchasing Soundlogic / XT Tailgate Speaker System. Please store this manual in a safe place for future reference. Getting Started Remove the unit from the box. Remove any packaging from the product. Please retain all packaging after you have checked and counted all the parts and the contents against the list.
Description of Parts Location of Controls 3
Num Item Function 1 DC IN Power Adapter Input (DC Input) 2 EXT BATT 12V INPUT Connect external DC 12V battery for operation (External Battery Not Included) 3 POWER Turn the speaker On or Off 4 PLAY/SCAN PLAY, Scan FM radio stations (only in FM radio mode) 5 USB USB input (Flash Drive) 6 SKIP‐/TUN‐ 7 SD/MMC CARD SD/MMC CARD input 8 LED Display Displays the information of the mode, channel or frequency 9 SKIP+/TUN+ 10 MODE Changes the mode between Bluetooth / USB‐SD / FM radio /
Turn the speaker to Bluetooth pairing mode ‐ 1. Turn ON the speaker. 2. You would hear a tone and Blue LED Light will begin to blink. The speaker is now in pairing mode. (Note: speaker pairs automatically with the last connected device.) Pairing your device with the Speaker – Your Bluetooth Tailgate Speaker can stream wireless audio from any Bluetooth enabled device within the range of 27‐33 Feet. Simply follow the below steps. 1. Turn ON the speaker. 2.
Listening to Music using USB / SD Card Slot 1. Turn on the speaker. 2. Insert USB flash drive into the USB slot or SD card into the SD/MMC CARD Slot. Music plays automatically. 3. Short press the SKIP+/TUN+ button or SKIP‐/TUN‐ button to move forward or backward on your playlist. 4. Short press PLAY/SCAN button to Play or Pause a track. Note: While using Bluetooth, if you insert USB Flash drive or SD Card, speaker would disconnect the Bluetooth connection and switch to USB / SD card function.
Using the Microphone 1. Turn on the speaker. 2. Insert the plug of the Microphone into the MIC INPUT of the speaker. 3. a. Press the MODE button to AUX 1 or AUX 2 mode (or with USB flash drive into the USB SLOT or SD card into the SD/MMC CARD SLOT on Bluetooth mode, or FM radio mode) with the MAIN VOLUME knob at minimum volume for microphone operation, or b.
TROUBLESHOOTING Problem Possible Cause Solution No power AC/DC adaptor plug not connected to the Plug to the wall outlet. wall outlet No sound Volume in minimum position. Turn MAIN VOLUME knob to increase the volume. The connected device is not in play mode. Play the music in the connected device and make sure the volume level is in high level. Press the MODE button to set the input Sound distortion Input source incorrect. source to the desired function.
FCC RF Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.End users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter. The device has been evaluated to meet general RF exposure requirement. The device can beused in portable exposure condition without restriction.
