User's Manual

5.1 ANSWER/END A CALL
Press the PHONE CALL BUTTON on your
A052 Speaker to both answer and end a call.
5.2 DECLINE AN INCOMING CALL
Press and Hold the PHONE CALL BUTTON for 2 seconds.
5.3 MAKE A CALL
Use your phone to dial as usual. Listen and talk through your A052 Speaker.
TROUBLESHOOTING
1. HEARING DISTORTION
A. Lower the volume on your A052 Speaker
and/or phone/device. (See section 4.1 GET THE BEST
SOUND)
B. Make sure it’s charged. Check for low battery, then charge A052 Speaker via USB.
2. NOT LOUD ENOUGH?
A. Turn up the volume on your phone/device or your
A052 Speaker.
B. Make sure it’s charged up.
3. UNABLE TO PAIR WITH BLUETOOTH® DEVICE?
A. Confirm that your phone/device is Bluetooth compatible.
B. Follow Section 4.1 GET CONNECTED instructions in this guide.
4. EXPERIENCING SIGNAL LOSS OR DROPOUTS VIA BLUETOOTH?
A. Move
A052 Speaker closer to your phone/device.
B. Make sure it’s charged up.
C. Turn off your
A052 Speaker and phone/device, then power up and reconnect.
SPECIFICATIONS
Bluetooth: 4.0+EDR
Bluetooth Profile: A2DP, AVRCP
3.5mm Aux-in
Speaker Diameter: 1.7” x 2 + Passive Radiator
Power Output: 5W x 2, 10W
Frequency Response: 140Hz - 20KHz
Built-in Microphone
BATTERY & POWER
Battery:4000mah
Music Streaming Time: 5 to 6 hours
Charging Time: 3 to 4 hours
Bluetooth Transmission Distance:
SAFETY INFORMATION
WARNING
Please read these safety warnings and cautions carefully to ensure your personal safety and prevent
property damage.
Fire and Electric Shock Hazard
Audio Power Output: 5W x 2, 10W
Audio Frequency Response: 140Hz - 20KHz
Built-in Microphone