Parts List

06
Q & A
Q: No image on the screen after turning the power on
A: Battery is exhausted. Connect the panel to the power
adapter and recharging.
Q: Unable to take photo or record video
A: SD card absent, wrongly inserted, full or faulty.
Q: Shut down
A: When all functions freeze or fail, insert an insulated
needle into the hole on the side of the main unit,
restart the device to find if the problem is resolved.Fig09
3. Storage precautions
Store the instrument under normal room temperature and humidity.
Straighten angulation section while lay into carrying case.
Store the equipment at a clear, dry and stable place.
System parameters
Display Unit
LCD Panel
Power source
4.5TFT LCD
MicroSD Card, support 128GB
Lithium battery 3500mAh
AC adapter: Input 100-240VAC 50/60Hz, Output 5VDC
Operating Environment
Operating
Temperatures
Distal end and insertion tube: 0-60° C
Other parts excepted of above: 0-40°C
Operating
Humidity
15-90% RH
Water proof
Insertion tube
Other parts
Ip67
Ip52
Fig09.