User's Manual

GENERAL Turn on/off Bluetooth function

Device Here you can connect and pair a mobile. See next page NOT DONE yet

Setting Turn on/off auto connect function

Pair a mobile:

①Press “Search” at area C. 

②

Device will list up founded devices at area B

③

Select a mobile by tap on it in list B.

④

Pop UP with keypad will open

⑤

Type in 4 digit PIN code and confirm with OK. System will ask same PIN code at mobile.

⑥

If you input same code at mobile, device will show “OK, successful” icon Pop UP.

⑦

New paired mobile will be found now in list of area A.

Connect a mobile:

①Select a mobile in list of area A

②Press “Connect” in area C

NOTE: Only allowed if no other mobile is connected.

Delete a mobile at area A:

①Select the mobile you want to delete in area A by tap on it.

②Press “Delete” at area C

③Deleted mobile is now gone at list A. You need to pair again if you want to use it again.

Button restrictions:

At area C the buttons have 3 different states:

a) Pressed: Highlighted while touched/tapped

b) Available: It is possible to touch button

c) Blocked: Greyed out, user cannot operate function

Each button got his own restrictions and availabilities:

Search:

Function is only allowed to be available if:

a) No mobile is connected

Function must be blocked if:

a) A mobile is connected

b) A Search is already running

c) List A is full (already 4 mobiles connected)

BT Operation