User's Manual

17
Power On / Off
Press the POWER /VOL button to turn the unit on. You can also turn on the unit by pressing the
button (
) on the remote.
Press and hold the POWER/VOL button on the front panel or press the POWER button (
) on
the remote to power off the unit.
Source Selection
Press the MENU Button on the front panel to change sources: TUNER, DISC, NAVI, CARD,
FLASH DRIVE, BT-TEL, F-AUX, R-AUX, SETUP, and STANDBY. The source is displayed on the
top left of the screen.
Volume Adjustment
To increase or decrease the volume level, turn the POWER/VOL knob on the front panel or press
the VOL+/ VOL- buttons on the remote control. The volume ranges from “0” to “40”.
Equalizer Setting
The Equalizer Setting allows you to easily adjust your audio system to meet your sound needs. To
get the best possible sound quality from your new system, be sure to adjust the settings for the
speakers as well.
Accessing the EQ Settings
Press the (SEL ) button on the remote control or at the bottom of the menu the “EQ” icon.
Selecting an EQ for Adjustment
Press the (
/ ) buttons on the remote or press the icons on the front panel once to select an
audio setting to be adjusted.
Adjusting an Audio Setting
Press the (
/ ) buttons on the remote or use the touch screen to adjust the selected feature.
EQ Settings
Audio Function Settings
USER
JAZZ
POP
EQ
ROCK
BASS -7 to +7
TREBLE -7 to +7
FADE -7 to +7
BAL -7 to +7
SW -7 to +7
LOUDNESS Off or ON
NOTE: The Bass and Treble levels are only adjustable when EQ is on “User” mode.
The Loudness function increases the sound ranges from low levels to high levels.
Exiting the Equalizer Setting
Touch the return arrow on the top right of the screen.
Press the (SEL) button on the remote control to exit the Equalizer setting.
Operation Instruction