User's Manual

31
Accessing the Flash Source
1. To switch to FLASH source, press the Menu button on the front panel and press the Flash
Drive icon or press the (SRC) button on the remote control until the FLASH appears at the top of
the screen.
NOTE: Make sure the USB cable is connected with a flash drive device.
2. Select the Main menu, and then touch the FLASH DRIVE icon to select FLASH as your
source.
Flash Drive Instructions
The touch keys on the screen for FLASH playback are described below:
: Press to Play/Pause
: Press to play previous track
: Press to play next track
: Press to return to the root folder menu
: Press to enter EQ setup
: Press to activate/deactivate Repeat Single/ Repeat Folder/Repeat All
: Press to activate/deactivate Shuffle Mode
: Press to display the numeric keypad on the screen and then you can use the numeric
keypad to access a track directly
Note: For other definitions, please go to CD/MP3/WMA/JPEG Operation as references.
FLASH DRIVE Operation