User's Manual

13
NOTE: The Bass and Treble levels are only adjustable when EQ is on “User” mode.
The Loudness function increases the sound ranges from low levels to high levels.
Exiting the Equalizer Setting
Touch the return arrow on the top right corner of the screen or press the (SEL) button on the
remote control to exit the Equalizer setting.
System Reset
To reset the system in case of a halt or other unusual operation, use the tip of a pen to press the
RESET button located on the front top-left corner of the unit. After the system resets, the unit will
restores the default settings before it was last powered off.
Mute
The volume can be mute by the following:
1. Press the MUTE button (
) on the remote control to mute the volume from the unit.
2. Press the
/VOL knob on the panel.
3. Turning the
/VOL knob counter-clockwise on the panel to decrease the volume level to "0".
NOTE: Press the MUTE button on the remote control again to restore the volume.
Adjusting the volume or using any of the audio set-up features will cancel the mute function.
Standby
1. On the Main menu press the Standby icon.
2. In the standby mode, the screen will turn off while the audio output is still active.
3. In the standby mode, touch the screen or press the Menu button to return the screen to the
normal stage.