User's Manual
Table Of Contents
34
A2DP
Pairing
Access the Bluetooth ―Setup” and select ―Pair Mode‖ to ―Yes‖, then select ―Phone‖ and a
―Waiting to pair‖ will be displayed on the screen. Now you can pair a phone with the unit.
This unit can pair with 5 mobile phones in all, but only one can be active at a time.
The Default phone will be retained only if all other paired phones are deleted. (Default Phone:
The phone that was first paired with the unit.)
When using the maximum limit to pair phones, (for example four mobile phones have been
connected with the unit, and you want to pair a new one, then the system will retain the default
phone and last paired phone) the phone least used (except the default phone) will be deleted
and the new paired phone will become the last phone.
Note: The password to pair your phone with the unit is ―1234‖. When asked/prompt, enter this
password on your phone.
Auto Connect
If the unit has been set to auto connect, it will attempt to connect to the last used phone first. If
Auto Connect is not activated, the unit will return to the previous operating mode.
When the phone connects to the unit successfully, the cell phone’s Bluetooth features will be