Users Manual

Picture 6Night mode
6.View firmware version: Press the receiving box button 3 times in succession, the receiving box and
camera current firmware version 5S will be superimposed in the video; in the unconnected state, only the
receiving box firmware version will be displayed, as shown in Picture 7; in the communication connection
state At the same time, the corresponding firmware version of the receiving box and camera is displayed,
as shown in Picture 8. (Note: Picture 7 and Picture 8 are for reference only, the subsequent version
number is displayed in the center, and only the receiving box version number is displayed in the
unconnected state)
Picture 7Reciver firmware version