Warranty

Maximum flooding line
Do not exceed the on key
Minimum
flooding line
Put it in the water,Make sure no bubbles are
attached to the sensor head in detection;
Slant and shake the Mainbody to drive out
bubbles. The device will turn off automatically
after one minute of inactivation.
from the back
① Slant and shake the Mainbody to drive out bubbles.
②Calibrating is necessary for the first time use.
③ In case of multiple detection ,the time interval should be greater than 10s to avoid a slight drift.
④ Keep the device immersing in water for more than 10s to get a more precision temperature detection.
⑤ Calibrate after vibration, collision and falling.
⑥ If the probe head is not clean, please clean it with purified water and calibrate it before use.
⑦ If it is not used for a long time, take out the battery and store it in a cool and dry place.
Do not expose to sunlight.
⑧ For detection, immerse the probe head completely and only.
⑥ The operation temperature is 10-40 ℃. If it is slightly outside of the range, please calibrate it
before use. Extreme temperature may cause permanent damage.
⑨ Do not use alcohol or other organic solution to clean the sensor probe, which will causepermanent damage.
⑩ Do not use it on corrosive liquids such as beverages, tea, sewage, etc.
⑪Please contact your authorized reseller for warranty registration and service.
Detection
Water Dectective 3
Water Dectective 3