User's Manual

www.art-tech.com

1. Press the menu button, enter into the Set menu. (There are 5 submenu

included: D'R, Exp, Epa, Gyr, Mrv)

3.1 D'R (Dual Rate) settings:

1. Press the sub button; enter into the D'R menu (Dual Rate Settings).

2. Press the Left or right button, choose a channel (aileron, elevator or

rudder), press the y / up or n / down button to increase or reduce the

value. The values set take effect when the D'R switch is switched on. The

Dual Rate exponential curve may be set anywhere between 0% and 125%

3.2.Exponential Settings:

1. Press the sub button; enter into the Exp menu (Exponential Settings).

2. Press the Left or right button, choose a channel (aileron, elevator or

rudder), press the y / up or n / down button to increase or reduce the value.

The exponential curve may be set anywhere between -100% and 100%)

3.3.EPA (End Point Adjustment):

1. Press the sub button; enter into the Ep menu (End Point Adjustment).

2. Press the Left or right button, choose a channel (minus signal means the

minus half part, while plus signal means the plus half part), press the y /

up or n / down button to increase or reduce the value. The values may be

set anywhere between -100% and 100%)

The Ep- is corresponding to one half trip of the stick, while the Ep+ is

corresponding to the other counterparts half. Reasonable settings of Ep

can achieve 3 point curve of any channel.

3.4 Gyroscope sensitivity / landing gear setting:

1. Press the sub button; enter into the Gyr menu (GYRO mixing).

2. Press the Left or right button, choose a channel (d means the CH5

switch is down, u means the CH5 switch is up), press the y / up or n / down

button to increase or reduce the value. The value may be set anywhere

between -100% and 100%)

3.5 Mixing Rate Settings

(A.V.D mode)

1. Press the sub button and enter the Mrv menu (Mixing Rate Settings).

2. Press the left or right button to choose the right option (A for aileron, E for

elevator, R for rudder). Press the y/up button or n/down button to

increase or decrease the setting value (The value -100%~100%

indicates the actual output mixing rate).

3. Popular options: