User's Manual

www.art-tech.com
04
Servo: AS-100(9 g) 3pcs
Speed controller:
ESC-30A
1pcs
Bettery packs:
9.6V/Ni-MH
1pcs
Charger:
1pcs
Specifications
Number of channels: 6
Charging jack: yes
3D switch: yes
Power supply: 12 V (1.5V * 8AA batteries)
We do not offer servo, speed controller, battery or changer with the radio control system .
Users can buy as spare parts.
Transmitter:
ETC62D-2.4GHz
1pcs
Receiver: ER62-2.4GHz 1p c s
Simulator cable: 1pcs
Belt: 1pcs
Manual: 1pcs
CD: 1pcs
Contents:
Voltage Display: LCD
Color: Black
Antenna length: 15 cm
Using occasions: aircraft, helicopters
Certification: FCC, CE, RoHS
Notice for use
Please do not fly in the rain or strong wind. The
water can sink into the transmitter which can
cause out of control,leading to crash.
Pleas note before using, test the radio set first
and any change to the radio set or model can
cause crash.
Please do not fly near housing, road,airport or
power line
The transmitter can not work properly if the
frequency bind button is pressed down
neglectfully. In this case, The transmitter and
the receiver must be bind again. More details ,
Please refer to the process of frequency bind for
2.4 GHz R/C system.
Please do not turn on several RC devices and
bind them at the same time, bind only one set of
RC device at one time.
The RC device should
not be stay in bind state for a long time.