User's Manual

www.art-tech.com
15
4. Press frequency again to get it
rebound.The transmitter get into working mode.
bind button
1. Press the frequency bind button, then
turn on the transmitter's power.
5. The indicator light turns bright again seconds
after pulling out the short- circuit plug, which
means that the radio system can work normally
now.
3. If the frequency is successful, the
indicator light will extinguish.
bind
2. Connect the ESC to receiver for electricity
supply, wihch results to the indicator light glitter.
And then plug the short-circuit plug into the
Receiver in the position of BATT.
If oil aircraft, please connect the power of receiver to other channel at first, and then plug it
to BATT after frequency bind.
The process of frequency bind for 2.4GHz R/C system
(R
eceiver with one antenna)