User's Manual
Table Of Contents
- 1 WELCOME
- 2. SOFTWARE OPERATION
- 3 Settings as Administrator
- 3.1 Multi-Device Settings
- 3.2 Network Settings
- 3.3 Basic Network Settings
- 3.4 Wireless Lan Settings
- 3.5 ADSL Settings
- 3.6 UPnP Settings
- 3.7 DDNS Service Settings
- 3.8 System Settings
- 3.9 Alias Settings
- 3.10 Date &Time Settings
- 3.11 Users Settings
- 3.12 PTZ Settings
- 3.13 Indicator Settings
- 3.14 Backup & Restore
- 3.15 Other Settings
- 3.16 Mail Service Settings
- 3.17 FTP Service Settings
- 3.18 Alarm Service Settings
- 3.19 Send Mail on Alarm
- 3.20 Path Settings
- 3.21 Server Push Mode (For Safari, FireFox, Google Browser)
- 3.22 Sign in mobile phone
- 4. APPENDIX
- 5. Specifications
- 6. OBTAINING TECHNICAL SUPPORT
MoreSecurity,MoreConvenience
Figure 9.9
3.18.3 Alarm Input Armed / IO Linkage on Alarm
If you want to connect external alarm devices, when it’s an alarm input device, choose Alarm Input Armed to
enable it, when it’s an output device, choose IO Linkage on Alarm to enable it.
Figure 10.0
There are two options for Trigger Level. (Figure 10.1)
High: When the external alarm device is close, then the alarm triggered.
Low: When the external alarm device is switching off, then the alarm triggered
.
Figure 10.1
There are two options for Output Level. (Figure 10.2)
High: Choose it, the IO Pins work as a switch which is closed.
Low: Choose it, the IO Pins work as a switch which is switching off
.
45