User's Manual
Table Of Contents
- 1 WELCOME
- 2. SOFTWARE OPERATION
- 3 Settings as Administrator
- 3.1 Multi-Device Settings
- 3.2 Network Settings
- 3.3 Basic Network Settings
- 3.4 Wireless Lan Settings
- 3.5 ADSL Settings
- 3.6 UPnP Settings
- 3.7 DDNS Service Settings
- 3.8 System Settings
- 3.9 Alias Settings
- 3.10 Date &Time Settings
- 3.11 Users Settings
- 3.12 PTZ Settings
- 3.13 Indicator Settings
- 3.14 Backup & Restore
- 3.15 Other Settings
- 3.16 Mail Service Settings
- 3.17 FTP Service Settings
- 3.18 Alarm Service Settings
- 3.19 Send Mail on Alarm
- 3.20 Path Settings
- 3.21 Server Push Mode (For Safari, FireFox, Google Browser)
- 3.22 Sign in mobile phone
- 4. APPENDIX
- 5. Specifications
- 6. OBTAINING TECHNICAL SUPPORT
MoreSecurity,MoreConvenience
Click Submit after these settings. Then click Test. You will see the following picture.
Figure 9.5
If it prompts error information as follows.
1) Can not connect to the server. Please check FTP Server is correct or not.
2) Network Error. Please try later.
3) Server Error.
4) Incorrect user or password. Please check the username and password is correct or not.
5) Can not access the folder. Please be sure the folder exists and your account is authorized
6) Error in PASV mode. Please be sure the server support PASV mode
7) Error in PORT mode. PASV mode should be selected if the device is behind a NAT
8) Can not upload file. Please be sure your account is authorized
Please check if parameters you filled in are correct or not. The format of image is like 000DC5D008FA (IPCAM)
_0_20101115152525_25.jpg
Please check if your FTP server supports this format of file name
3.18 Alarm Service Settings
Î
Figure 9.6
Enter Alarm Service Settings page to configure Motion Detection function.
3.18.1 Motion Detect Armed
If enable Motion Detect Armed, it will record and make a sound of alarm when there is motion detection
43