User's Manual
Table Of Contents
- 1 WELCOME
- 2. SOFTWARE OPERATION
- 3 Settings as Administrator
- 3.1 Multi-Device Settings
- 3.2 Network Settings
- 3.3 Basic Network Settings
- 3.4 Wireless Lan Settings
- 3.5 ADSL Settings
- 3.6 UPnP Settings
- 3.7 DDNS Service Settings
- 3.8 System Settings
- 3.9 Alias Settings
- 3.10 Date &Time Settings
- 3.11 Users Settings
- 3.12 PTZ Settings
- 3.13 Indicator Settings
- 3.14 Backup & Restore
- 3.15 Other Settings
- 3.16 Mail Service Settings
- 3.17 FTP Service Settings
- 3.18 Alarm Service Settings
- 3.19 Send Mail on Alarm
- 3.20 Path Settings
- 3.21 Server Push Mode (For Safari, FireFox, Google Browser)
- 3.22 Sign in mobile phone
- 4. APPENDIX
- 5. Specifications
- 6. OBTAINING TECHNICAL SUPPORT
MoreSecurity,MoreConvenience
1.3 Product Views
1.3.1 Front View
Figure 1.1
1 LENS: CMOS sensor with fixed zoom lens.
2 Housing: Alloy housing for waterproof
3 Wireless Antenna: WI-FI Antenna （For wireless model only）
1.3.2 Cable Interface
Figure 1.2
Audio Output: The jack is used to plug external speaker or audio output device.
Audio Input: The jack is used to plug external microphone or audio input device.
I/O Alarm Pin: 1 Alarm input(GND) 2 Input 3 Output A 4 Output B
Network Interface: RJ-45/10-100 base T
Network Light: The green LED will on when network connected, the yellow LED will blink when data
transferred
Reset: Press and hold the RESET button for about 15 seconds, all the parameters will be back to the factory
default settings. (Please keep the power on when do RESET)
Power: DC 12V/2A power supply
4