MyTag Anti-loss Device USER Guide
Scan to Install app for IOS Scan to Install app for Android
Device Compatibility First make sure your device support “Bluetooth 4.0 Smart” IOS IOS:IOS7 or above such as IPhone 4S/5/5s/5c/6/6 plus IPad3/4/ Mini/ Air/ Mini2/iPod Touch5 id Andro Android id:Android 4.
SETUP Step 1 For iPhone, please search and download ATag at iTunes App Store; For Android phone, please search and download MyTag at Google Play. App logo: Step 2 Turn Bluetooth on for your device. Go to "Settings" then "General" on your mobile phone and make sure that Bluetooth is ON or Enabled. Step 3 Press power button 3 seconds until the anti-lost beep and it is in pairing mode. Turn on APP and tap search icon and the anti-lost alarm will show on the Search List.
IOS system main screen Android system main screen
Operation 1.Make the anti-lost alarm sound. From the App main screen, tap the search icon. The anti-lost alarm will sound. Click the Function Button on anti-lost alarm to turn off the sound. 2.Make your phone alarm sound. From the anti-lost alarm, click the Function Button, the anti-lost alarm App will ring the sound you selected on configuration. In/Out of Range Alert 1.If the distance of the Paired anti-loss alarm and mobile phone is out of range, both anti-loss alarm and mobile phone will trigger alert.
Federal Communications Commission (FCC) Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
