Instruction Manual

20
17. Appendix 1 EMC Information
Guidance and manufacturer's declaration -
Electromagnetic emission
Arm Blood Pressure Monitor is intended for use in the electromagnetic
environment specified below. The customer or the user of the Arm Blood
Pressure Monitor should assure that it is used in such an environment.
Emissions
Complian
ce
Electromagnetic
environment
- guidance
RF emissions
CISPR 11
Group 1
The Arm Blood Pressure Monitor
uses RF energy only for its internal
function. Therefore, its RF
emissions are very low and are not
likely to cause any interference in
nearby electronic equipment.
RF emissions
CISPR 11
Class B
The Arm Blood Pressure Monitor is
suitable for use in all
establishments, including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic
purposes.
Harmonic
emissions
IEC61000-3-2
N.A.
Voltage
fluctuations/
flicker
emissions
IEC61000-3-3
N.A.
humidity of 10%~93%, atmospheric
condition: 70kPa-106kPa without corrosive
gas and with good ventilation.
temperature of -20
℃~55℃
and the relative
The device shall be stored indoors at the
Avoid strong impact, direct impact,
exposure or rain during transportation.
Transportation
and Storage
Environment