Instruction Manual

9
Note: Consult your doctor if unexpected
readings are obtained.
(5) Memory function
1) The device can be used for 1 user. This device
can store up to 240 sets of measurements. Once
the memory log is full, old values are refreshed
with new ones.
2) In standby mode, press the " " button once
and the device will display the average value of
the blood pressure measured for the first three
times. Press the " " button again, the first
memory will be displayed. Press the " " button
again and the rest memories will be displayed one
by one. Group number, SYS and DIA, and pulse
rate are displayed on the screen alternately.
(6) Delete memory
In standby mode, press the " " button once and
the historical measured value is displayed on the
screen. Then keep pressing the " " button for 3
seconds to delete measurements stored on the
device and the " " icon will appear on the screen.