Instruction Manual

18. Appendix 1 EMC Information
Protection Against
Electric Shock
Operating
Environment
Transportation and
Storage Environment
Avoid strong impact, direct impact,
exposure or rain during transportation.
The device shall be stored indoors at
the temperature of -20℃~55℃ and the
relative humidity of 10%~93%,
atmospheric condition:
70kPa-106kPa without corrosive gas
and with good ventilation.
Temperature
Humidity
Condition
Atmospheric
Condition
5℃-40℃
15%-90%
RH
70kPa-
106kPa
If stored or
used beyond
the designated
temperature
and humidity
range, it will
not be used
properly.
Condition
Internally powered supply
Guidance and manufacturer's declaration -
Electromagnetic emission
Arm Blood Pressure Monitor is intended for use in the electromagnetic
environment specified below. The customer or the user of the Arm Blood
Pressure Monitor should assure that it is used in
such an environment.
Emissions
Complian
ce
Electromagnetic
environment
- guidance
RF emissions
CISPR 11
Group 1
The Arm Blood Pressure Monitor
uses RF energy only for its internal
function. Therefore, its RF
emissions are very low and are not
likely to cause any interference in
nearby electronic equipment.
RF emissions
CISPR 11
Class B
The rm Arm Blood Pressure
Monitor is suitable for use in all
establishments, including domestic
establishments and those directly
connected to the public low-voltage
power supply network that supplies
buildings used for domestic
purposes.
Harmonic
emissions
IEC61000-3-2
N.A.
Voltage
fluctuations/flick
er
emissions
IEC61000-3-3
N.A.
19