Instruction Manual

(5) Memory function

(6) Delete memory

(7) Self check for cuff strap

(8) “Keep Still” indication

1）Each measured value is stored automatically under the

appropriate “User” group. This device can store up to 120

sets of measurements for each user. (Note: There is no

memory for “Guest”.) Once the memory log is full, old values

are refreshed with new ones.

2）In standby mode, press the " " button once and the

device will display the average value of the blood pressure

measured for the first three times. Press the " " button

again, the first memory will be displayed. Press the " "

button again and the rest memories will be displayed one by

one.

The " " icon is always displayed on the screen when the

cuff is wore correctly. When the cuff is wore too loosely, the

" " icon will always flash to remind you. If the" " icon is

flashing all the time, please press the " " button to stop the

measurement.

The " " icon flashes when the body moves during the

measurement, which may cause incorrect measurement

results. Please re-measure it.

Keep pressing the " " button for 3 seconds to delete

measurements stored on the device and the " " icon will

appear on the screen.