User's Manual

9
(2) Year/month/date setting
In standby mode, press " " for about 3 seconds to enter
the date setting, and "year" will flash. Press " " to adjust to
the desired year, and then press " " to confirm the
selection. When the "year" is set, it will automatically enter
the month setting. At this time, the "month" icon will flash.
You can switch to the desired value by pressing the " "
button. Follow the same step to set "date", "hour", and
"minute".
(3) Voice on/off Setting (for voice version only, optional
function)
1)After the time setting is finished, it will automatically enter