User Manual

[Note] In order to effectively record the date and time of evidence collection of
traffic safety accidents, please set the correct time before using this machine.
5. One-key mute function
In the working state, click on the screen recording key and the microphone on
the screen changes into a forbidden icon, indicating that the video recording
function has been turned off. At this time, the recorder only records the image
but not the sound. Click the recording button again when the screen microphone
into the recording icon, indicating the recovery of recording function.
[Reminder] The settings will be saved automatically. There is no need to set
mute function after startup.
6. Video playback
In the startup state, in the recording and photographing interface, press the mode
key to enter the playback interface.
7. Reverse view
First, the car recorder must be connected to the recorder, and the red wire on the
cable camera is connected to the reversing lamp. The car charging machine will
automatically start the video recording state. In any state, if there is reversing, the
reversing image will be displayed. The machine will automatically return to the
video mode after the end of reversing visual mode.
8. Parking monitoring
When turning on the stop monitoring function, if the car has a slight vibration
(the trigger sensitivity can be set as needed in the menu) in the shutdown state,
then the recorder will automatically turn on the video for 20 seconds and then
turn off the machine.（Note:This function only works if your dashcam is
equipped with hard wire which connect car battery directly ）
9. License plate number function
Select the license plate number to enter the license plate setting interface, then press
[OK key] to set the license plate. Press [up key] and [down key] to select the
character number to be changed, select [OK key] to jump to the next digit setting,
and press [OK key] again after the last bit setting to confirm the license plate
number to be changed.
IV. Product Specifications
Built-in image sensor
200W
Rear camera resolution
1920*1080
Lens angle
130 degrees
Video resolution
2560*1440 and 1920*1080