User Manual

(4) Video playback
II. Installation Guide
1.Turn off the car engine.
2.Insert the TF card into the slot of the recorder.
[Note] Please use high speed TF card (above Class10) with capacity not less
than 8GB. TF card can support 128 GB at most.
3.Fix the recorder to the original rearview mirror of the car.
4.Insert car charger into car cigarette lighter.
5.Connect the USB interface of the recorder and the car charger with the
charging extension line.
[Note] The charging extension line can be laid along the edge of the car
windshield.
6.Install the rear camera in the rear of the vehicle, pay attention to the direction
when installing. Wiring can be laid along the vehicle ceiling. Connect the rear
plug to the recorder rear camera interface after installation.
7.Adjust the lens position to ensure that the lens remains level with the ground.