User's Manual
1. Press the battery compartment cover and
slide it down as shown to open the battery
cover. (Picture 1)
2. Insert the batteries as shown. Make sure
the “+” and“-”battery contacts are
correctly oriented as shown. (Note:
Please use 2 pieces of AA alkaline
batteries or AA type NI-MH batteries.
(Picture 2)
3. Replace the battery cover and push back
into the locked position.
Attaching and Detaching the E3
+
transmitter
Attaching the E3+ transmitter to the camera
hot shoe
1. Turn off the camera and E3+
transmitter
2. Align the E3+ transmitter hot shoe
with camera’s hot shoe mount.
3. Slide the E3+ transmitter all the way
into the camera’s hot shoe mount.
4. Lock the E3+ transmitter by sliding
the mounting foot lock lever to the
right until the lock lever clicks in
place.(See picture 3)
Detaching the E3+ Transmitter
1. Lock release: press the lock-release
button while slide the lock lever all the
way back to the left.(see picture 4)
2. Slide the E3+ transmitter out of camera’s
hot shoe mount.
Turn On/Off the E3
+
transmitter
1. Turn On: Press and hold the power button until MENU interface is displayed on
screen.
2. Turn off: Press and hold the power button until the LCD screen goes blank.
1
2