User's Manual

test flash in E-TTLⅡ/E-TTL autoflash
: Flash exposure
metering setting
Turn< >and press button function
corresponding to to perform flash
exposure compensation
Turn< >directly to perform flash
exposure compensation without pressing
button.
: Beep
Disable beep to sound on E3
+
transmitter
when the slave unit is fully charged
Enable a beep to sound on E3
+
transmitter when the slave unit is fully
charged
: LCD panel
illumination
When a button or dial is operated, the
LCD panel illumination go on for 12 sec.
Disable LCD panel illumination
When a button or dial is operated, the
LCD panel illuminates and keeps always
on.
2. P.Fn: Setting personal functions
1. When Custom Function screen is displayed, press function button 1 corresponding
to to display Personal Function screen.
2. Set the personal function in the same way as step 3 and 4 for the custom function.
3. To restore all the default setting of personal function, set it in the same way as step
6 for custom function.
Personal Functions Chart
Personal
Function
No.
Functions Setting No. Setting and descriptions
: LCD panel
display contrast
You can adjust the contrast of the LCD panel in
5 levels.
:LCD
panel
illumination
color: Master
When the E3
+
transmitter is set as master unit
（radio transmission wireless shooting, linked
shooting）, select green as color of the LCD
panel illumination.
When the E3
+
transmitter is set as master unit
（radio transmission wireless shooting, linked
shooting）, select orange as color of the LCD
panel illumination.
:LCD
When the E3
+
transmitter is set as slave unit
（linked shooting）, select orange as color of the