User's Manual
2.Press and hold the function button 1 corresponding to until Custom Function
screen is displayed.
3.Turn< >to select an item(number) to set, and press< >button to display the
setting.
4.Turn< >to select the setting, and press< > button to confirm the selection
5.Press function button 4 corresponding to to return to previous state.
6.To restore all the default settings of custom function, press function button 2
corresponding to , and press function button 1 corresponding to .To
cancel the operation, press function button 4 corresponding to .
Custom Functions Chart
Custom
Function
No.
Functions Setting No.
Setting and descriptions
: Auto IDLE
Enable Auto IDLE when the E3
+
transmitter is not operated for 5min.,
Disable Auto IDLE when the E3
+
transmitter is not operated for 5min.,
:
Modeling flash
Press the camera’s depth-of-field preview
button to fire the modeling flash
Press E3
+
transmitter’s test flash button to
fire the modeling flash
Press the camera’s depth-of-field preview
button or E3
+
transmitter’s test flash
button to fire the modeling flash
Disable the modeling flash
: FEB
auto cancel
Enable: Set to automatically cancel FEB
after shooting three shots with FEB
Disable: Set not to automatically cancel
FEB after shooting three shots with FEB
: FEB sequence
Set the order of FEB sequence as
following:
0: Standard exposure
- : Decreased exposure(darker)
+ : Increased exposure(brighter)
Set the order of FEB sequence as
following:
- : Decreased exposure(darker)
0: Standard exposure
+ : Increased exposure(brighter)
: Test firing with
autoflash
Set the flash output as 1/32 when firing
the test flash in E-TTLⅡ/E-TTL
autoflash
Set the flash output as 1/1 when firing the