User's Manual

1.Press <Mode> button to set the flash mode to
<M>
2.Set the number of firing group:
While is displayed, press function button 2
corresponding to to set the groups to fire.
The setting changes as follows each time pressing
the button: ALL（ ）→A/B （ ）
→A/B/C（ ）.
3.Select a firing group: Press function button 3
corresponding to , turn< > to select the
group for which you want to set the flash output,
and press < >button.
4.Set the flash output: Press function button 3
corresponding to <*±>, turn< >to set the flash
output and press < >button. Repeat step 3and 4
to set the output of all groups
5.Take the picture: each group fires at the set flash
output
MULTI: Stroboscopic Flash
Stroboscopic flash is an advanced manual flash shooting method. When using
stroboscopic flash with a slow shutter speed, you can shoot multiple successive
movements within a single picture, similar to stop-motion pictures. In stroboscopic
flash, set the flash output, number of flashes, and flash frequency (number of flashes
per second = HZ).
1. Press master unit’s <MODE>button to set the
flash mode to<MULTI>.
2. Set the number of firing groups and flash
output for each group by referring to manual flash
on the preceding page.
3. Set the flash frequency and number of
flashes:
when is displayed, press function button 2
corresponding to , turn< > to set the
number of flashes and press< >button;