User's Manual
Flash exposure compensation and other settings set on the E3
+
transmitter (master unit)
will be automatically set in the flash (slave). You don’t need to operate the slave unit.
1. Flash Exposure Compensation
In the same way as normal exposure compensation, you can set exposure
compensation for flash. The flash exposure compensation amount can be set up to ±3
stops in 1/3-stop increments.
1. Press function button 4 until is displayed.
2. Press function button 2 corresponding to , is
displayed and flash compensation amount is
highlighted.
3. Set the flash compensation amount: turn< > to set
the flash compensation amount, and press < >button.
4. ”0.3” indicates 1/3 stops, and”0.7”indicates 2/3 stops
5. To cancel flash exposure compensation, return the
compensation amount to “±0”.
Note:
1. By setting C.Fn13, you can choose to set the flash compensation amount by
turning < > only, without operating function button 2 .
2. If the camera’s exposure compensation is set to 1/2-stop increments, flash
exposure compensation will be up to ±stops in 1/2-stop increments.
2.FEB
With FEB (Flash Exposure Bracketing) function, you can take three shots while
automatically changing the flash output. The settable range is up to ±3 stops in 1/3-stop
increments.
1. Press function button 4 until is displayed.
2. Press function button 3 corresponding to ,
is displayed and the FEB level display is highlighted.
3. Set the FEB level: turn< > to set FEB level and
press < > button.
4.”0.3”indicates 1/3 stops, and”0.7”indicates 2/3 stops.
5. When used together with flash exposure, FEB shooting
is performed based on the flash exposure compensation
amount.