User's Manual

Master Unit Slave Unit

ETTL/M Ratio OFF

Set A, B or C as the firing group. If set to D or E,

flash will not be triggered

Ratio A:B

Set A or B as the firing group. If set to C, D or E,

flash will not be triggered

Ratio A:B C（ETTL）/

Ratio A:B:C（M）

Set A,B or C as the firing group

Set A, B, C, D or E as the firing group. Each group

will fire at a flash mode accordingly with how it is

set on the master unit.: ETTL/M/OFF

Setting the firing group:

Press function button 3 <>, the firing group parameter will flash on the LCD; press

function button 2<> or 3<>to select from A/B/C/D/E; press power button or

function button <> to finish the setting.

2. Setting transmission channel and wireless radio ID for Save Units

Please make sure master unit and slave units are set to the same transmission channels

and wireless radio IDs. If the transmission channels and wireless radio IDs of the

master unit and slave unit are different, the slave unit does not fire.

Setting the transmission channel: press function button 1 <>, the transmission

channel parameter will flash on the LCD; press function button 2<> or 3<>to

select from Ch. 1-15 or Auto; press power button or function button 4< >to finish

the setting.

Setting the wireless radio ID: press function button 2 <>, the thousands digit will

flash on the LCD; press function button 1 <> to select the ID digit to set; press

function button 2<> or 3<> to select ID number from 0-9; press power button or

function button 4 < >to finish setting for each digit.

3.Positioning the flash and camera

Position the camera and flash within the range of wireless radio transmission.

4.Check the transmission status

Check that the radio transmission confirmation lamp is lit green. Icons and

are displayed on the receiver’s LCD screen.

The color of radio transmission confirmation lamp changes depending on the transmission

status of the master unit and the slave unit.

Color Status Description Action