User's Manual

Attaching and Detaching the E3
+
receiver
Attaching the flash to the E3
+
receiver
1. Align the flash’s hot shoe and the
E3
+
receiver’s hot shoe mount.
2. Slide the flash all the way into the
E3
+
receiver’s hot shoe mount
3. Lock the flash with the flash’s locking
mechanism.
Detaching the flash
1. Release the lock of flash according to its
locking mechanism（see picture）
2. Slide the flash out of E3
+
receiver’s hot
shoe mount.
Turn On/Off the E3
+
receiver
1. Turn On: Press and hold the power button until MENU interface is displayed on
screen.
2. Turn off: Press and hold the power button until the LCD screen goes blank.
USB port
The firmware of E3
+
receiver can be upgraded via the USB port, so as to adjust its
parameter and extend its compatibility with cameras to come in the future.
1.1 Connect the USB cable to the computer and the other end of the USB cable to
E3+ receiver’s USB port. A mobile device icon will be displayed on the computer
when successfully connected.
1
2