User's Manual

5. Check the operation
Press the master unit’s test flash button (charge lamp). The slave unit flash will fire. If
not, check that it is placed within the operation range.
Remote Release
While performing wireless shooting, you can release camera shutter remotely from
slave unit that using E3
+
receiver. Simply by pressing function button 4 <>on the
E3
+
receiver, you can perform remote release (remote control shooting). For master
unit operations, see instruction manual of E3
+
transmitter, Canon ST-E3-RT Speedlite
transmitter or flash based on personal choice of transmitting devices.
V．Technical Specification
Type Wireless Trigger For Canon/Receiver
Compatible cameras EOS type-A camera compatible with E-TTL II/E-TTL autoflash
Exposure control
system
E-TTLⅡ/E-TTL auto, manual flash
Frequency 2405 – 2475Hz
Channel Auto, Ch.1-15
Wireless radio ID 0000-9999
Slave unit control
Up to 5 groups（A/B/C/D/E）, up to 15 units
Transmission distance 100m+
Power source
2 x AA alkaline batteries or AA NI-MH batteries; 5V DC（External
power port）
Receiving current ≤70mA
Max. operating
current
≤80mA
Dimension
（L×W×H）: L（93×70×47.5）mm
Weight(approx.)
93.3g（Excluding the batteries）
Green Lit Transmission OK -
Red
Lit No connected Check the channel and ID
Blinking
Too many units Master Units + slave units = 16units
or less
Error Turn the power off and on again
Blue Lit
Shortly lit when
E3
+
receiver
sends flash or
remote release
order